4/4/2023 0 Comments Walls on radiation island![]() However, for full shielding efficiency, it is essential that this product be earthed (grounded). If protection is needed against high frequencies only (microwaves, mobile telephone masts, etc.) then grounding is not necessary. Once the ELF shielding wallpaint is dry it can be finished by over-coating with any of our wall paints and, once earthed, the shielding paint is activated against both high and low frequency radiations. Normally touch dry in 1-2 hours.Īvoid temperatures below 41☏ (5☌) and above 68☏ (20☌). Stir gently and thoroughly before use.Īpply in two medium coats with a 6 - 9" foam or short pile gloss roller, ensure the first coat is fully dry before recoating (minimum of 4hrs). READ ALL APPLICATION NOTES BEFORE COMMENCING.ĭo not thin. If in doubt, consult with a professional from a Lead-Safe Certified Firm. WARNING: Older buildings may contain lead-based paint, which requires professional remediation if it is disturbed. This product can be painted directly onto wallpaper but this is not recommended as the product is intended to be a permanent structural feature. Prime bare plaster with ECOS Plaster Sealer, and bare sheetrock, with ECOS Drywall Primer. Remove all loose and flaking material and, if previously wallpapered, remove all traces of paste and size. Surfaces must be clean, dry and free of grease. An EMR/EMF Grounding Kit is required to achieve optimum performance. This EMR protection paint is recommended for use on primed walls, floors, and ceilings. Having a dark gray color, it is intended to be over-painted by ECOS wall paint. See Application Instructions below for more detailsĮMR/EMF Shielding Paint uses a high-quality nickel flake to provide shielding against EMF & RF frequencies and EMR radiation, including Wi-Fi and 5G.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |